pulley for supercharger... any ideas?

Introduce your self and tell us about your ride!!
GTP World USA #1
Posts: 1
Joined: Thu Jun 19, 2008 12:00 am

pulley for supercharger... any ideas?

Postby bamagtp97 » Thu Jun 19, 2008 8:35 pm

im running about 12 pounds off of my 97 gtp i just picked up about four days ago... whats the smallest pulley i can get for it does any one know?
GTP World Blower Freak (4000 club)
Posts: 4542
Joined: Thu Aug 23, 2007 12:00 am

pulley for supercharger... any ideas?

Postby Condore21 » Thu Jun 19, 2008 10:46 pm

It is hard to determine what pulley you could use b.c we don't know what your mods are. If you are bone stock then the smallest you can run safely is the stock pulley. When you start to mod, then you can drop pulley sizes. Read the Official Read First Thread located in the Horsepower Talk section to learn about what you need to do in order to drop pulley sizes safely. It should be one of the last replies in the Read First thread.
User avatar
Site Owner
Site Owner
Posts: 15370
Joined: Mon Aug 07, 2006 12:00 am
Location: Lima, Ohio

pulley for supercharger... any ideas?

Postby gtpforever » Wed Jun 25, 2008 4:06 am

Smaller pulley without its supporting mods will create the "BIG BANG THEORY" of the supercharged motor world.[img]/domainskins/bypass/img/smileys/wink.gif[/img]
Now fixing....1998 Silvermist GTP with about 182,000 miles! Dead till fixed!!!!
Current Mods: XPZ, Stage 3 heads 150int/130exh, IRC bar/plate I/C, N*, 85mm maf, ZZP billet fuel logs, PRJ wires, 2.55, 2.8, 3.25, 3.4 pulleys and might have spun a bearing while dynoing!!!!! Worlds fastest GTP to get in the driveway to get rebuilt. No one comes close.
Image <<<<<Its BACK so watch out!
Good-luck to everyone who is true to the M90.....its like having a fat wife, sure a turbo (hot 120lb blond is better, but the M90 (fat wife) will be there forever!

Return to “Welcome!”

Who is online

Users browsing this forum: No registered users and 1 guest